Contents
Specifications
Baler Pickup
Windguard Description
8 rods
Standard Pickup Lift
Manual
Sweep Width Inside
64.97in
Sweep Width On Flare
70.08in
Tine Spacing
2.64in
Width Between Outside Tines
58in
Number Of Tine Bars
5
Number Of Tines
110
Optional Pickup Lift
Hydraulic
Pickup Position
Offset to right side
Pickup Protection
V-belt slippage & lost motion reel drive
Dimensions information
Length Without Bale Chute
205in
Max. Height
70in
Tractor Power Take-Off: Required
62hp
Width
9.17ft in
Length With Bale Chute
247.01in
Specifications
Tying Mechanism
Tying Mechanism Type
Knotter
Tying Twine Capacity
6balls
Tying Capacity
4
Tying Wire Capacity
No wire
Maindrive
Flywheel Diameter
22.1in
Flywheel Weight
247lb
Pto Driveline
Std three-joint, Category 4
Pto Speed
540rpm
Main Drive Protection
Std three-joint, Category 4
Sales Literature
Literature Number
CIH7180801
Literature Date
July, 2008
Document Number
86624842
Document Date
10/1/2001
Years Of Manufacture
Manufacturing Status
Current
First Entry Date
8/21/2008
Revision Date
2/27/2012
Bale Size
Bale Cross Section,Height X Width(In,Mm)
14 x 18 (356 x 457)
Bale Length Range (In,Mm)
12 to 52 (305 to 1321)
Density Control, Standard
Adj spring loaded tension rails
Density Control, Optional
No option
Bale Thrower Compatible
BTX11 available (80 lb bale)
Feeding
Feeder Description
Rotary feeder w/ packer
Feeder Opening Sq In (Sq Cm)
283 (1826), right side entry
Tires
Standard Tireleft
31 x 13.50 – 15, 6PR
Weights
Weight With Twine Tie
3399.6lb
Tires
Standard Tire Right
27 x 9.50 – 15, 6PR
Plunger
Plunger Speed (Strokes/Min)
93
Plunger Stroke
30in