Contents
Specifications
Baler Pickup
Windguard Description
13 rods
Standard Pickup Lift
Manual
Sweep Width Inside
74.81in
Sweep Width On Flare
79.93in
Tine Spacing
2.64in
Width Between Outside Tines
67.49in
Number Of Tine Bars
6
Number Of Tines
156
Optional Pickup Lift
Hydraulic
Pickup Position
Offset to right side
Pickup Protection
V-belt slippage & lost motion reel drive
Dimensions information
Length Without Bale Chute
205in
Max. Height
70.99in
Tractor Power Take-Off: Required
75hp
Width
10ft in
Length With Bale Chute
247.01in
Specifications
Tying Mechanism
Tying Mechanism Type
Knotter
Tying Twine Capacity
8 balls
Tying Wire Capacity
No wire
Maindrive
Flywheel Diameter
22.1in
Flywheel Weight
247lb
Pto Driveline
Std three-joint, Category 6
Pto Speed
540rpm
Main Drive Protection
Shearbolt, overrunning & slip clutches
Sales Literature
Literature Number
CIH7180801
Literature Date
July, 2008
Document Number
86624842
Document Date
10/1/2001
Years Of Manufacture
Manufacturing Status
Current
First Entry Date
8/21/2008
Revision Date
2/27/2012
Bale Size
Bale Cross Section,Height X Width(In,Mm)
14 x 18 (356 x 457)
Bale Length Range (In,Mm)
12 to 52 (305 to 1321)
Density Control, Standard
Adj spring loaded tension rails
Density Control, Optional
No option
Bale Thrower Compatible
BTX11 available (80 lb bale)
Feeding
Feeder Description
Rotary feeder w/ packer
Feeder Opening Sq In (Sq Cm)
283 (1826), right side entry
Weights
Weight With Twine Tie
3714.8lb
Tires
Standard Tireleft
31 x 13.50 – 15, 6PR
Standard Tire Right
27 x 9.50 – 15, 6PR
Weights
Weight With Wire Tie
3851.5lb
Plunger
Plunger Speed (Strokes/Min)
79
Plunger Stroke
30in