Contents
Specifications
Baler Pickup
Windguard Description
13 rods
Standard Pickup Lift
Manual
Sweep Width Inside
74.81in
Sweep Width On Flare
79.93in
Tine Spacing
2.64in
Width Between Outside Tines
67.49in
Number Of Tine Bars
6
Number Of Tines
156
Optional Pickup Lift
Hydraulic
Pickup Position
Offset to right side
Pickup Protection
V-belt slippage & lost motion reel drive
Dimensions information
Length Without Bale Chute
217.01in
Max. Height
70.99in
Tractor Power Take-Off: Required
75hp
Width
10ft in
Length With Bale Chute
247.01in
Specifications
Tying Mechanism
Tying Mechanism Type
Knotter
Tying Twine Capacity
8 balls
Tying Wire Capacity
No wire
Maindrive
Flywheel Diameter
22.1in
Flywheel Weight
357.2lb
Pto Driveline
Std three-joint, Category 6
Pto Speed
540rpm
Main Drive Protection
Shear bolt, overrunning & slip clutches
Sales Literature
Literature Number
HF-5117-09
Literature Date
September, 2009
Years Of Manufacture
Manufacturing Status
Current
First Entry Date
8/25/2009
Revision Date
2/27/2012 to 6/15/2014
Bale Size
Bale Cross Section,Height X Width(In,Mm)
16 x 18 (406 x 457)
Bale Length Range (In,Mm)
12 to 52 (305 to 1321)
Density Control, Standard
Adj hydraulic density
Density Control, Optional
No option
Bale Thrower Compatible
No
Feeding
Feeder Description
Rotary feeder w/ packer
Feeder Opening Sq In (Sq Cm)
318 (2052),right side entry
Tires
Standard Tireleft
14L x 16.1, 6PR
Weights
Weight With Twine Tie
4199.9lb
Tires
Standard Tire Right
11L x 15, 6PR
Plunger
Plunger Speed (Strokes/Min)
93
Plunger Stroke
30in