Caterpillar 980M Wheel Loader

Specifications

Dimensions information

Ride Height

1.42ft in

Full Length:

26.17ft in

Width Over Tires

10.83ft in

Maximum height

10.25ft in

Wheelbase length (Distance between the foremost and rearmost wheels)

12.5ft in

Dimensions information – High Lift

Ride Height

1.42ft in

Hinge Pin Height At Maximum Lift

15.58ft in

Centerline Of Rear Axle To Edge Of Counterweight

8.17ft in

Centerline Of Rear Axle To Hitch

6.25ft in

Height – Top Of Exhaust Pipe

12.33ft in

Height – Top Of Hood

10.25ft in

Height – Top Of Rops

12.58ft in

Hinge Pin Height At Carry

2.25ft in

Note

All dimensions are approximate and based on Michelin 29.5R25 XLDD1 L4 radial tires.

Lift Arm Clearance At Maximum Lift

13.08ft in

Maximum Width Over Tires

10.83ft in

Full lenght machine – Without Bucket

26.83ft in

Rack Back – Carry Height

48 degrees

Rack Back – Maximum Lift

61 degrees

Rack Back At Ground

39 degrees

Tread Width

8ft in

Wheel Base

12.5ft in

Dimensions information – Standard Lift

Ride Height

1.42ft in

Maximum Width Over Tires

10.83ft in

Note

All dimensions are approximate and based on Michelin 29.5R25 XLDD1 L4 radial tires.

Full lenght machine – Without Bucket

26.17ft in

Tread Width

8ft in

Height – Top Of Exhaust Pipe

12.33ft in

Height – Top Of Hood

10.25ft in

Rack Back – Carry Height

48 degrees

Height – Top Of Rops

12.58ft in

Centerline Of Rear Axle To Edge Of Counterweight

8.17ft in

Hinge Pin Height At Carry

2.08ft in

Rack Back – Maximum Lift

61 degrees

Hinge Pin Height At Maximum Lift

14.83ft in

Wheel Base

12.5ft in

Centerline Of Rear Axle To Hitch

6.25ft in

Lift Arm Clearance At Maximum Lift

12.42ft in

Rack Back At Ground

40 degrees

Specifications

Engine specifications

How many cylinders does an engine have?

6

Brand

2236

Model

CAT C13 ACERT

Clear engine power

378hp

Full engine power

417hp

Torque N-m

1617lb ft

Net Power – Iso 9249

386hp

Model

Cat? C13 ACERT?

Note

The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a CO2 equivalent of 2.288 metric tonnes.

Peak Gross Torque – 1,200 Rpm – Sae J1995

1627lb ft

Peak Gross Torque – 1,200 Rpm – Iso 14396

1609lb ft

Maximum Net Power – 1,700 Rpm – Iso 9249

386hp

Maximum Net Torque – 1,100 Rpm

1515lb ft

Maximum Power – 1,700 Rpm – Iso 14396

420hp

Maximum Power – 1,700 Rpm – Iso 14396 – Metric

426hp

Maximum Net Power – 1,700 Rpm – Iso 9249 – Metric

392hp

Maximum Net Power – 1,700 Rpm – Sae J1349

386hp

Maximum Net Power – 1,700 Rpm – Sae J1349 – Metric

392hp

Maximum Power – 1,700 Rpm – Sae J1995

425hp

Maximum Power – 1,700 Rpm – Sae J1995 – Metric

431hp

Maximum Net Torque – 1,000 Rpm

1505lb ft

Maximum Power – 1,800 Rpm – Iso 14396

406hp

Maximum Power – 1,800 Rpm – Iso 14396 – Metric

412hp

Maximum Power – 1,800 Rpm – Sae J1995

412hp

Maximum Power – 1,800 Rpm – Sae J1995 – Metric

417hp

Peak Gross Torque – 1,300 Rpm – Sae J1995

1617lb ft

Maximum Net Power – 1,800 Rpm – Iso 9249

373hp

Maximum Net Power – 1,800 Rpm – Sae J1349

373hp

Maximum Net Power – 1,800 Rpm – Iso 9249 – Metric

378hp

Maximum Net Power – 1,800 Rpm – Sae J1349 – Metric

378hp

Peak Gross Torque – 1,300 Rpm – Iso 14396

1602lb ft

U.S. Epa Tier 4 Final/Eu Stage Iv – Maximum Power – Sae J1995

425hp

Tier 2/Stage Ii, Tier 3/Stage Iiia Equivalent: Maximum Power – Sae J1995

412hp

Functional specifications

Basic weight of a machine

66337lb

Standart fuel tank capacities

112.5gal

Hydraulic liquid capacity in hydraulic machinery

40gal

Coolant system fluid capacity:

12gal

Basic transmission Fluid Capacity in vehicle

20.3gal

Front Axle/Diff Fluid Capacity

22gal

Rear Axle/Diff Fluid Capacity

22gal

Transmission specifications

How many forward gears::

4

How many reverse gears::

4

Top Speed: – Forward

24.5mph

Top Speed: – Reverse

24.5mph

Forward – 1

4.3mph

Forward – 2

8.3mph

Forward – 3

14.6mph

Forward – 4

24.5mph

Note

Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 933 mm (37 in) roll radius.

Reverse – 1

4.8mph

Reverse – 2

9.4mph

Reverse – 3

16.7mph

Reverse – 4

24.5mph

Weights

Basic weight of a machine

66337lb

Note

Weight based on a machine configuration with Michelin 29.5R25 XLDD1 L4 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link?, open differential axles, secondary steering, sound suppression, and a 5.4 m3 (7.1 yd3) GP bucket with BOCE.

Note (1)

For 5.4 m3 (7.1 yd3) general purpose buckets with BOCE.

Note (2)

Weight based on a machine configuration with Michelin 29.5R25 XLDD1 L4 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link, open differential axles (front/rear), secondary steering, sound suppression, and a 5.4 m3 (7.1 yd3) general purpose bucket with BOCE.

Buckets

Bucket Capacities

4.2-12.2 m3 (5.25-16.0 yd3)

Hydraulic System specifications

Relief Valve Setting

4975psi

What is pump capacity:

119gal/min

Axles

Front

Fixed

Rear

Oscillating ?13 degrees

Maximum Single-Wheel Rise And Fall

22.5in

Hydraulic System specifications

Hydraulic Cycle Time – Total

10.1 s

Implement System – Maximum Operating Pressure

4975 psi

Implement Transmission pump:

Variable Displacement Piston

Implement System – Maximum Pump Output At 2,250 Rpm

119 gal/min

Implement System – Optional 3rd Function Maximum Flow

63 gal/min

Implement System – Optional 3rd Function Maximum Pressure

3159 psi

Hydraulic Cycle Time – Rated load capacity: – Raise From Carry Position

5.3 s

Hydraulic Cycle Time – Rated load capacity: – Dump, At Maximum Raise

1.7 s

Hydraulic Cycle Time – Rated load capacity: – Lower, Empty, Float Down

3.1 s

Hydraulic Cycle Time – Rated load capacity: – Total

10.1 s

Brakes

Brakes

Brakes meet ISO 3450:2011 standards

Operating Specifications

Note (1)

For a machine configuration as defined under ?Weight.?

Note (2)

Full compliance to ISO 143971:2007 Sections 1 thru 6.

Note

Full compliance to ISO (2007) 143971 Sections 1 thru 6, which requires 2% verification between calculations and testing.

Breakout Force

50357lb

Static Tipping Load – Full 40 Degrees Turn – With Tire Deflection

43133lb

Static Tipping Load – Full 40 Degrees Turn – No Tire Deflection

45847lb

Service Refill Capacities

Cooling System

14gal

Fuel Tank

112.5gal

Crankcase

9.8gal

Def Tank

5.5gal

Hydraulic Tank

40gal

Transmission

20.3gal

Differential – Final Drives – Front

22gal

Differential – Final Drives – Rear

22gal

Sound

Note (1)

*Distance of 15 m (49.2 ft), moving forward in second gear ratio.

Note (2)

**For machines in European Union countries and in countries that adopt the ?EU Directives.?

Note (3)

***European Union Directive ?2000/14/EC? as amended by ?2005/88/EC.?

Note

*Distance of 15 m (49.2 ft), moving forward in second gear ratio.

With Cooling Fan Speed At Maximum Value – Operator Sound Pressure Level (Iso 6396:2008)

75 dB(A)

With Cooling Fan Speed At Maximum Value – Exterior Sound Power Level (Iso 6395:2008)

112 dB(A)

With Cooling Fan Speed At Maximum Value – Exterior Sound Pressure Level (Sae J88:2013)

78 dB(A)*

With Cooling Fan Speed At 70% Of Maximum Value – Operator Sound Pressure Level (Iso 6396:2008)**

72 dB(A)

With Cooling Fan Speed At 70% Of Maximum Value – Exterior Sound Power Level (Iso 6395:2008)**

109 LWA***

Cab

Rops/Fops

ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards

Bucket Capacities

Bucket Range

4.2-12.2 m (5.25-16.0 yd)

Engine – Tier 3/Stage Iiia Equivalent

Emissions

Tier 3/Stage IIIA

Engine – Tier 4 Final/Stage Iv

Emissions

Cat engine with ACERT Technology ? meets Tier 4 Final/Stage IV emission standards.

Model

Cat C13 ACERT

Maximum Net Power – 1,700 Rpm – Sae J1349

386hp

Peak Gross Torque – 1,200 Rpm – Sae J1995

1627lb ft

Cylinder bore is the diameter of each cylinder

5.2in

Stroke length engine

6.2in

Engine displacement

763cu in

Note (1)

The power ratings apply at the stated speed when tested under the reference conditions for the specified standards.

Note (2)

The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner and aftertreatment.

Note (3)

The gross power advertised is with the fan at maximum speed.

Maximum Net Torque – 1,100 Rpm – Sae J1349

1515lb ft

Maximum Power – 1,700 Rpm – Sae J1995

425hp

Engine – Tier 2/Stage Ii, Tier 3/Stage Iiia Equivalent

Model

Cat C13 ACERT

Maximum Power – 1,800 Rpm – Sae J1995

417hp

Maximum Net Power – 1,800 Rpm – Sae J1349

373hp

Peak Gross Torque – 1,300 Rpm – Sae J1995

1617lb ft

Maximum Net Torque – 1,000 Rpm – Sae J1349

1505lb ft

Cylinder bore is the diameter of each cylinder

5.2in

Stroke length engine

6.2in

Engine displacement

763cu in

Emissions

Cat engine with ACERT Technology ? meets Tier 2/Stage II, Tier 3/Stage IIIA equivalent emission standards.

Sound – Tier 2/Stage Ii, Tier 3/Stage Iiia Equivalent

Operator Sound Pressure Level – Iso 6396:2008

75 dB(A)

Exterior Sound Power Level – Iso 6395:2008*

112 dB(A)

Exterior Sound Pressure Level – Sae J88:2013**

78 dB(A)

Note (1)

The sound values indicated are for specific operating conditions only. Machine and operator sound levels will vary at different engine and/or cooling fan speeds. Hearing protection may be needed when the machine is operated with a cabin that is not properly maintained, or when the doors and/or windows are open for extended periods or in a noisy environment.

Note (2)

*For a standard machine configuration, measured according to the procedures specified with the cooling fan speed set at maximum value.

Note (3)

**For a standard machine configuration, measured according to the procedures specified. The measurement was conducted under the following conditions: distance of 15 m (49.2 ft), moving forward in second gear ratio with the cooling fan speed set at maximum value.

Sound – Tier 4 Final/Stage Iv

Note (1)

The sound values indicated are for specific operating conditions only. Machine and operator sound levels will vary at different engine and/or cooling fan speeds. Hearing protection may be needed when the machine is operated with a cabin that is not properly maintained, or when the doors and/or windows are open for extended periods or in a noisy environment.

Operator Sound Pressure Level – Iso 6396:2008

72 dB(A)

Exterior Sound Power Level – Iso 6395:2008*

112 dB(A)

Exterior Sound Pressure Level – Sae J88:2013**

78 dB(A)

Note (2)

*For a standard machine configuration, measured according to the procedures specified with the cooling fan speed set at maximum value.

Note (3)

**For a standard machine configuration, measured according to the procedures specified. The measurement was conducted under the following conditions: distance of 15 m (49.2 ft), moving forward in second gear ratio with the cooling fan speed set at maximum value.