Contents
Specifications
Blades
Su – Base blade width:
12.9ft in
Blade Type
SU, U
Lgp Su-Blade Capacity With Trash Rack
27.6yd3
U-Blade Capacity With Trash Rack
32.4yd3
Su-Blade Capacity – With Trash Rack
26.1yd3
U-Base blade width:
14ft in
Dimensions information
Length W/ Blade
19.99ft in
Width Over Tracks
8.66ft in
Maximum height
11.35ft in
Full horizontal length of track on ground
10.53ft in
Ride Height
2.03ft in
Overvall length without blade:
15.22ft in
Full lenght machine – Basic Tractor
15.22ft in
Width – Over Trunnions
10ft in
Width – Without Blade
120in
Width – With Blade
155in
Full lenght machine – With Blade
240in
Width – Without Trunnions – Standard Shoe
8.66ft in
Height – Rops/Canopy
11.35ft in
Height – Stripped Top
8.76ft in
Dimensions information – Lgp
Track Gauge
92in
Machine Height – Grouser Tip – Exhaust Stack
129.7in
Length – Basic Tractor – With Striker Bars With Two Counterweights*
206.4in
Width – Tractor – Over Trunnions
130.4in
Height – Top Of Roof-Mounted Precleaner
145.2in
Note
*With the following attachments add: SU Blade 1844 mm/72.6 in; U Blade 2241 mm/88.2 in; Drawbar 406 mm/16.0 in.
Height – Grouser
3.1in
Machine Height – Grouser Tip – Length Of Track On Ground
126.2in
Without Trunnions – Standard Shoe Width
130in
Machine Height – Grouser Tip – Erops (Top Of Railing)
140.4in
Length – Basic Tractor – Tag Link Trunnion To Tip – Rear Grouser*
183in
Machine Height – Grouser Tip – Ride height
24.1in
Dimensions information – Non-Suspended
Track Gauge
82in
Width – Tractor – Over Trunnions
120.4in
Note
*With the following attachments add: SU Blade 1844 mm/72.6 in; U Blade 2241 mm/88.2 in; Drawbar 406 mm/16.0 in.
Height – Grouser
3.1in
Height – Top Of Roof-Mounted Precleaner
145.2in
Length – Basic Tractor – Tag Link Trunnion To Tip – Rear Grouser*
183in
Length – Basic Tractor – With Striker Bars With Two Counterweights*
206.4in
Machine Height – Grouser Tip – Erops (Top Of Railing)
140.7in
Machine Height – Grouser Tip – Exhaust Stack
136.31in
Machine Height – Grouser Tip – Ride height
23.8in
Machine Height – Grouser Tip – Length Of Track On Ground
128.31in
Without Trunnions – Standard Shoe Width
106in
Dimensions information – Standard
Track Gauge
82in
Length – Basic Tractor – With Striker Bars With Two Counterweights*
206.4in
Length – Basic Tractor – Tag Link Trunnion To Tip – Rear Grouser*
183in
Height – Top Of Roof-Mounted Precleaner
145.2in
Height – Grouser
3.1in
Machine Height – Grouser Tip – Ride height
24.1in
Without Trunnions – Standard Shoe Width
106in
Note
*With the following attachments add: SU Blade 1844 mm/72.6 in; U Blade 2241 mm/88.2 in; Drawbar 406 mm/16.0 in.
Machine Height – Grouser Tip – Length Of Track On Ground
126.2in
Machine Height – Grouser Tip – Erops (Top Of Railing)
140.4in
Width – Tractor – Over Trunnions
120.4in
Machine Height – Grouser Tip – Exhaust Stack
136.7in
Undercarriage specs
Track Gauge
6.84ft in
Base shoe size:
22in
Length – Track On Ground
10.53ft in
Track Gauge – Lgp
92in
Track On Ground – Lgp
126in
Track Rollers/Side
8
Track Rollers/Side – Lgp
8
Track Width
1.84ft in
Number Of Track Rollers Per Side
8
Width – Shoe – Lgp
38in
Size of the contact area on the ground: – Lgp
9610in2
Size of the contact area on the ground:
5549in2
Specifications
Engine specifications
How many cylinders does an engine have?
6
Brand
2236
Model
C15 ACERT
Full engine power
347hp
Clear engine power
310hp
Revolutions Per Minute
2000rpm
Engine displacement
928cu in
Cylinder bore is the diameter of each cylinder
5.4in
Stroke length engine
6.8in
Emissions
Tier 4 Final/Stage IV/Korea Tier 4
Model
Cat C15 ACERT
Flywheel Power
335hp
Note (1)
All non road Tier 4 Interim and Final, Stage IIIB and IV, and Korea Tier 4 diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULS or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specification are required. Consult your OMM for further machine specific fuel recommendations.
Note (2)
Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.
Note (3)
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.5 kg of refrigerant which has a CO2 equivalent of 3.575 metric tonnes.
Rpm
1850rpm
Net Power – 1,900 Rpm – Iso 9249/Sae J1349
312hp
Net Power – 1,900 Rpm – Iso 9249/Sae J1349 (Din)
317hp
Net Power – Maximum – Iso 9249/Sae J1349 At 1,700 Rpm
335hp
Net Power – Maximum – Iso 9249/Sae J1349 Din At 1,700 Rpm
343hp
Functional specifications
Basic weight of a machine
85150lb
Standart fuel tank capacities
170gal
Value of the working voltage
24V
Amperage
100amps
Transmission specifications
1 Forward
2.1mph
2 Forward
3.8mph
3 Forward
6.6mph
1 Reverse
2.8mph
2 Reverse
5mph
3 Reverse
8.8mph
1.0 Forward
2.1mph
2.0 Forward
3.8mph
3.0 Forward
6.6mph
1.0 Reverse
2.8mph
2.0 Reverse
5mph
3.0 Reverse
8.8mph
Weights
Basic weight of a machine
86710lb
Standard Blade
Width
12.9ft in
Capacity
26.1yd3
Service Refill Capacities
Fuel Tank
170gal
Standards
Rops
SAE J1040 MAY94, ISO 3471:1994
Fops
SAE J/ISO 3349 APR98 Level II, ISO 3449:1992 Level II
Rippers
Each Additional Shank
732lb
Operating Weights
Lgp Waste Handler
91600lb
Standard Waste Handler
86710lb
Blades – Capacity (Sae J1265)
8 U Landfill
27.7yd3
8 Su Landfill
25.6yd3
8 Su Lgp Landfill
28.9yd3
Blades – Width – Over End Bits
8 Su Landfill
12.9ft in
8 U Landfill
13.9ft in
8 Su Lgp Landfill
14.9ft in
Shipping Weight
Lgp Waste Handler
77900lb
Standard Waste Handler
73400lb