Contents
Specifications
Dimensions information
Wheelbase length (Distance between the foremost and rearmost wheels)
108.9ft in
Front Axle Clearance
18.5in
Front Tread Range
1485-2438 mm 58.5-96 in. 1714 to 2122 mm 67.5 to 83.5 in.
Approx. Shipping Weight
13657lb
Rear Tread Range
1604-2302 mm 63.1-90.6 in.
Turning Radius Without Brakes
6.96ft in
Limited Slip Differential
Yes
Specifications
Engine specifications
Engine Manufacturer
John Deere PowerTech PVS
Cylinder Liners
Wet sleeve
Fuel Tank Capacity
71.3gal
Engine displacement
415cu in
Engine construction
Single variable geometry turbo with air to air aftercooling system and cooled exhaust gas recirculation
Underhood Muffler
Yes
Power Take-Off(Pto)
Standard
Independent 1-3/8 in., 540/1000 reversible shaft
Optional
1-3/8-in. 540/540E/1000 reversible shaft or 1-3/8-in. 540E/1000/1000E reversible shaft
Pto Actuation
Electrohydraulic
Performance
Advertised Engine
155hp
Advertised Pto
90 @ 2100 kW 121 @ 2100 hp
Transmission specifications
Standard Transmission; Forward/Reverse
20-speed AutoQuAad PLUS ECO transmission; 40 km/h 20-speed AutoQuad PLUS ECO transmission; 25 mph
Optional Transmission; Forward/Reverse
16-speed PowrQuad PLUS transmission, 20-speed AutoQuad PLUS ECO transmission (50), John Deere Infinitely Variable Transmission (IVT)(0.050 to 42), or John Deere IVT (0.050 to 50) km/h 16-speed PowrQuad PLUS transmission, 20-speed AutoQuad PLUS ECO transmission (31), John Deere Infinitely Variable Transmission (IVT) (0.030 to 26), or John Deere IVT (0.030 to 31) mph
Clutch, Wet/Dry
Wet
Creeper
Included with IVT
Reverser
Left-hand base
On-The-Go Shifting (Yes/No/Partial)
Yes
Tires
2wd
Front 11.00-20 in.Rear 480/80R46
Mfwd
Front 380/85R30Rear 480/80R42
Hydraulic specifications
Pump Rated Output 1
30.1gal/min
Maximum Operating Pressure
2900psi
Remote Control Valves Available
3-450 Series Mechanical SCVs standard, 3 to 4 electrohydraulic SCVs; 2 or 4 mechanical SCVs are optional
Hitch Draft Control Load Sense Type
Electrohydraulic
Hitch Category (Sae Designation)
3/3N
Sensing Type
Electronic lower link
Joystick Scv Control
Mechanical or electronic
Hydraulic Type
Closed-center, pressure/flow compensated
Final Drive
Final Drive Type
Inboard planetary three pinion
Differential Controls
Electrohydraulic
Availability
“Front YesFront & Rear Yes””
Engage On-The-Go Rear Differential Lock
Yes
Axle Type
Rack and pinion
Brakes, Type And Control
Hydraulic wet disk
“