Contents
Specifications
Bucket
Dump Clearance At Max Raise
9.1ft in
Arm Length
8.2ft in
Breakout Force
17985.01lb
Heaped Bucket Capacity:
3yd3
Width:
8.2ft in
Digging Depth
2ft in
Dimensions information
Ride Height
1.6ft in
Full Length:
23.6ft in
Maximum height
10.6ft in
Wheelbase length (Distance between the foremost and rearmost wheels)
9.4ft in
Maximum hinge pin height reach:
12.7ft in
Reach at Maximum Lift & Dump:
3.7ft in
Specifications
Electrical System
Alternator
24/100 (V/A)
Voltage
24 VV
Starter
24/10.5 (V/HP)
Battery
2 x 135 Ah
Engine specifications
Fuel Injection
Electronic Common Rail high-pressure injection
How many cylinders does an engine have?
4
Model
4045HFL93
Air Cleaner
Dry air filter with main and safety element, pre-cleaner, service indicator on the display
Full engine power
134hp
Revolutions Per Minute
2000rpm
Torque N-m
363 lb ft
Engine displacement
275cu in
Torque (Revolutions Per Minute)
1600rpm
Engine construction
Water-cooled with exhaust turbo charging, externally cooled exhaust gas recirculation and diesel particulate filter
Cylinder bore is the diameter of each cylinder
4.2in
Stroke length engine
5in
Functional specifications
Basic weight of a machine
24030lb
Standart fuel tank capacities
54.2gal
Hydraulic liquid capacity in hydraulic machinery
44.9gal
How much oil does an engine need:
5.4gal
Coolant system fluid capacity:
10gal
Hydraulic system fluid capacity:
29gal
Basic transmission Fluid Capacity in vehicle
1gal
Front Axle/Diff Fluid Capacity
4.3gal
Rear Axle/Diff Fluid Capacity
4gal
Static Tipping Weight
18740lb
Turning Radius of a vehicle:
19.3ft in
Wheel specs
17.5R25 L3
Transmission specifications
How many forward gears::
3
How many reverse gears::
3
Top Speed: – Forward
24.9mph
Top Speed: – Reverse
24.9mph
Hydraulic System specifications
Max Operating Pressure
4786 psi
Relief Valve Setting
4351.2psi
What is pump capacity:
36gal/min
Raise Time
5.4sec
Dump Time
1.8sec
Lowering Time:
4sec
Transmission pump:
“Load-sensing” variable axial piston pump with output and flow control, and pressure cut-off in the control block