Contents
Specifications
Bucket
Dump Clearance At Max Raise
10.8ft in
Arm Length
9.7ft in
Breakout Force
44959.54lb
Heaped Bucket Capacity:
5.2yd3
Width:
9.1ft in
Digging Depth
4ft in
Dimensions information
Ride Height
1.9ft in
Full Length:
30.5ft in
Maximum height
11.9ft in
Wheelbase length (Distance between the foremost and rearmost wheels)
12.5ft in
Maximum hinge pin height reach:
14.4ft in
Reach at Maximum Lift & Dump:
3.1ft in
Specifications
Electrical System
Alternator
28/100 (V/A)
Voltage
24 VV
Starter
24/10.5 (V/HP)
Battery
2 x 180 Ah
Engine specifications
Fuel Injection
Electronic Common Rail high-pressure injection
How many cylinders does an engine have?
4
Model
D936 A7
Air Cleaner
Dry air filter with main and safety element, pre-cleaner, service indicator on the display
Full engine power
255hp
Revolutions Per Minute
1300rpm
Torque N-m
1033 lb ft
Engine displacement
642cu in
Torque (Revolutions Per Minute)
1300rpm
Engine construction
Water-cooled with exhaust turbo charging, externally cooled exhaust gas recirculation and diesel particulate filter
Cylinder bore is the diameter of each cylinder
4.8in
Stroke length engine
6in
Functional specifications
Basic weight of a machine
51035lb
Standart fuel tank capacities
106gal
Hydraulic liquid capacity in hydraulic machinery
70gal
How much oil does an engine need:
11.6gal
Coolant system fluid capacity:
13.7gal
Hydraulic system fluid capacity:
35.7gal
Basic transmission Fluid Capacity in vehicle
3gal
Front Axle/Diff Fluid Capacity
11.1gal
Rear Axle/Diff Fluid Capacity
10.6gal
Static Tipping Weight
34720lb
Turning Radius of a vehicle:
21.3ft in
Wheel specs
23.5R25 L3
Transmission specifications
How many forward gears::
3
How many reverse gears::
3
Top Speed: – Forward
24.9mph
Top Speed: – Reverse
24.9mph
Hydraulic System specifications
Max Operating Pressure
5076 psi
Relief Valve Setting
4351.2psi
What is pump capacity:
77gal/min
Raise Time
5.5sec
Dump Time
3sec
Lowering Time:
3.5sec
Transmission pump:
“Load-sensing” variable axial piston pump with output and flow control, and pressure cut-off in the control block